Foundation Coat

The substrate must be clean of all dirt and contaminants. Pre-soak the surface with water. The surface must be wet  at time of application of Foundation Coat for proper adhesion.  Mix Foundation Coat with water to a mortar-like consistency.  Substitute 1 quart of water for 1 quart K-88 Admix  for improved adhesion to cast concrete.  Trowel apply to a uniform thickness of 1/8 inch. Form a cove of the material at the juncture of the wall  and footing to prevent water entry.  Mist Foundation Coat 2 – 3 times during first 24 hours  when temperatures are above 70°F.  1 quart of K-88 Admix eliminates need to mist cure.

Apply: Trowel

Project Gallery


Conproco
×